Cobalt Networks OPENGEAR 9034 Manual do Utilizador Página 1

Cobalt Digital Inc. 9034 Analog to Digital Converter with Audio Embedding and Frame Sync Owner’s Manual 9034-OM Version: 2.0

Page 10 of 28 9034 Owner’s Manual •••• (V 2.0) Installation and Setup In This Chapter This chapter includes the following sections: • Static Disch

9034 Owner’s Manual •••• (V 2.0) Page 11 of 28 Rear Module Installation (Optional) If you are installing the card in a 8310-C-BNC or 8310-BNC frame

Page 12 of 28 9034 Owner’s Manual •••• (V 2.0) Rear Modules Available for 9034 Figure 3. BNC Designations for the Card Rear Modules available for t

9034 Owner’s Manual •••• (V 2.0) Page 13 of 28 Board Installation Use the following steps to install the card in the openGearTM 8310 frame: 1. Ref

Page 14 of 28 9034 Owner’s Manual •••• (V 2.0) Card Control and Status Card Status The card indicates the status of the input signal with the four

9034 Owner’s Manual •••• (V 2.0) Page 15 of 28 Proc Phase This is Chroma (C channel) phase adjustment, expressed in degrees, ranging from –360 to +

Page 16 of 28 9034 Owner’s Manual •••• (V 2.0) Audio Delay Specifies the amount of additional audio delay after matching video delay. When the c

9034 Owner’s Manual •••• (V 2.0) Page 17 of 28 Output Gain The gain of each output is adjustable from +30 dB to –100 dB in 0.1 dB steps. After –100

Page 18 of 28 9034 Owner’s Manual •••• (V 2.0) Restore Factory Settings In this parameter, move the toggle switch up to make the factory default se

9034 Owner’s Manual •••• (V 2.0) Page 19 of 28 Remote Control In This Chapter This section provides a detailed explanation on using remote control

Page 2 of 28 9034 Owner’s Manual •••• (V 2.0) 9034 •••• HD/SD Analog to Digital Converter with Audio Embedding and Frame Sync Owner’s Manual • Cob

Page 20 of 28 9034 Owner’s Manual •••• (V 2.0) Menu Item Format Description Framesync Enable On/Off Enables the Frame Sync Horizontal Offset 0

9034 Owner’s Manual •••• (V 2.0) Page 21 of 28 Menu Item Format Description Composite Y/C YPbPr BetaCam YPbPr MII SD Input Type YPbPr SMPTE Sel

Page 22 of 28 9034 Owner’s Manual •••• (V 2.0) Technical Specifications Table 4. Card - Technical Specifications Number of Inputs 3 Input Type Dif

9034 Owner’s Manual •••• (V 2.0) Page 23 of 28 Standard SMPTE 276M Number of Inputs 8 unbalanced Input Level 0.1 to 2.5V p-p (5V p-p tolerant) Inpu

Page 24 of 28 9034 Owner’s Manual •••• (V 2.0) Service Information In This Chapter This chapter includes the following sections: • Troubleshooting

9034 Owner’s Manual •••• (V 2.0) Page 25 of 28 Warranty and Repair Policy The openGearTM card is warranted to be free of any defect with respect to

Page 26 of 28 9034 Owner’s Manual •••• (V 2.0) Ordering Information 9034 and Related Products Your 9034 HD/SD Analog to Digital Converter with Audi

9034 Owner’s Manual •••• (V 2.0) Page 27 of 28 Notes:

Page 28 of 28 9034 Owner’s Manual •••• (V 2.0) Contact Us Contact Cobalt Digital Inc. General Business Office and Technical Support 217.344.124

9034 Owner’s Manual •••• (V 2.0) Page 3 of 28 Important Regulatory and Safety Notices Before using this product and any associated equipment, refer

Page 4 of 28 9034 Owner’s Manual •••• (V 2.0) Environmental Information The equipment that you purchased required the extraction and use of natural

9034 Owner’s Manual •••• (V 2.0) Page 5 of 28 Contents Introduction 6 In This Chapter...

Page 6 of 28 9034 Owner’s Manual •••• (V 2.0) Introduction In This Chapter This chapter includes the following sections: • A Word of Thanks • Ove

9034 Owner’s Manual •••• (V 2.0) Page 7 of 28 Audio rates are always 48kHz nominally but discrete AES inputs pass through sample rate converters to

Page 8 of 28 9034 Owner’s Manual •••• (V 2.0) Functional Block Diagram The 9034 has a very flexible signal flow path and feature set that combines

9034 Owner’s Manual •••• (V 2.0) Page 9 of 28 Discrete AES Audio Output The 9034 can emit 16 channels (8 pairs) of discrete AES audio on 75 ohm BNC